Làm ơn giúp e với ạ, e cảm ơn !! Choose the word or phrase ( A, B , C or D) that best fits each space in the following passage. Write A, B , C or D in the space. Enjoy some great computer facts and interesting information about these(1) devices which play such an important role in our modern day lives. Learn about parts of the computer such as the RAM, ROM and CPU as well as fun info about how we use computers to make our lives (2) and more enjoyable. Early electronic computers, developed around the 1940’s, were the size of a large room and consumed huge amounts of (3). They were vastly different to the modern computers we use today, especially when compared to small and portable laptop computers. Computers (4) to carry out instructions. These instructions are usually very simple and require adding numbers together, moving data from one place (5) another etc. A computer program can include as little as a few instructions to upwards of millions of instructions depending on the complexity of the program. Modern (6) such as word processors, web browsers and graphic editors take large teams of programmers a long time to complete. A computer’s memory stores numbers in huge amounts of cells that are addressed and can be quickly (7) by the CPU to perform calculations. There are two main types of computer memory, ROM (read only memory) and RAM (random access memory). ROM contains pre-written software and data that the CPU can only read, while RAM can be accessed and written to at any time. Computers interact (8) a number of different I/O (input/output) devices to exchange information. These peripheral devices include the keyboard, mouse, display, hard drive, printer and more. Computers are used to help link the world in the form of networks. Networked computers allow users to share and exchange data that is stored in different locations. You may have heard of a local area network (LAN) or wide area network (WAN) (9) connects areas of various sizes. The Internet is a vast network of computers spanning the globe (10) allows users to access email, the World Wide Web and other applications. Although we normally think of computers as the ones we use in our everyday lives to surf the web, write documents etc, small computers are also embedded into other things such as mobile phones, toys, microwaves and MP3 players. We use computers all the time, often without even knowing it! 1.A. amazed B. amazing C. amazingly D. amaze 2.A. easier B. more easier C. much easy D. a lot easy 3.A. elect B. electrical C. electrically D. electricity 4.A. progammed B. are programmed C. program D. are programming 5.A. on B. for C. to D. about 6.A. applications B. application C. apply D. applied 7.A. acceses B. accessed C. accessing D. accessory 8.A. on B. for C. to D. with 9.A. whose B. who C. which D. whom 10.A. whose B. who C. that D. whom

Read the following passage and mark the letter A, B, C or D on your answer sheet to indicate the correct answer to each of the following questions.

In the history of technology, computers and calculators were innovative developments. They are essentially different from all other machines because they have a memory. This memory stores instructions and information. In a calculator, the instructions are the various functions of arithmetic, which are permanently remembered by the machine and cannot be altered or added to. The information consists of the numbers which are keyed in.

An electronic pocket calculator can perform almost instant arithmetic. A calculator requires an input unit to feed in numbers, a processing unit to make the calculation, a memory unit, and an output unit to display the result. The calculator is powered by a small battery or by a panel of solar cells. Inside is a microchip that contains the memory and processing units and also controls the input unit, which is the keyboard, and the output unit, which is the display.

The input unit has keys for numbers and operations. Beneath the key is a printed circuit board containing a set of contacts for each key. Pressing a key closes the contacts and sends a signal along a pair of lines in the circuit board to the processing unit, in which the binary code for that key is stored in the memory. The processing unit also sends the code to the display. Each key is connected by a different pair of lines to the processing unit, which repeatedly checks the lines to find out when a pair is linked by a key.

The memory unit stores the arithmetic instructions for the processing unit and holds the temporary results that occur during calculation. Storage cells in the memory unit hold the binary codes for the keys that have been pressed. The number codes, together with the operation code for the plus key, are held in temporary cells until the processing unit requires them.

When the equals key is pressed, it sends a signal to the processing unit. This takes the operation code - for example, addition - and the two numbers being held in the memory unit and performs the operation on the two numbers. After the addition is done, the result goes to the decoder in the calculator's microchip. This code is then sent to the liquid crystal display unit, which shows the result, or output, of the calculation.

According to the passage, one function of the memory unit is _______.

A. to control the keyboard

B. to send codes to the display unit

C. to alter basic arithmetic instructions

D. to store temporary results during calculation

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions.

In the history of technology, computers and calculators were innovative developments. They are essentially different from all other machines because they have a memory. This memory stores instructions and information. In a calculator, the instructions are the various functions of arithmetic, which are permanently remembered by the machine and cannot be altered or added to. The information consists of the numbers keyed in.

An electronic pocket calculator can perform almost instant arithmetic. A calculator requires an input unit to feed in numbers, a processing unit to make the calculation, a memory unit, and an output unit to display the result. The calculator is powered by a small battery or by a panel of solar cells. Inside is a microchip that contains the memory and processing units and also controls the input unit, which is the keyboard, and the output unit, which is the display.

The input unit has keys for numbers and operations. Beneath the key is a printed circuit board containing a set of contacts for each key. Pressing a key closes the contacts and sends a signal along a pair of lines in the circuit board to the processing unit, in which the binary code for that key is stored in the memory. The processing unit also sends the code to the display. Each key is connected by a different pair of lines to the processing unit, which repeatedly checks the lines to find out when a pair is linked by a key.

The memory unit stores the arithmetic instructions for the processing unit and holds the temporary results that occur during calculation. Storage cells in the memory unit hold the binary codes for the keys that have been pressed. The number codes, together with the operation code for the plus key, are held in temporary cells until the processing unit requires them.
When the equals key is pressed, it sends a signal to the processing unit. This takes the operation code-for example, addition-and the two numbers being held in the memory unit and performs the operation on the two numbers. A full adder does the addition, and the result goes to the decoder in the calculator's microchip. This code is then sent to the liquid crystal display unit, which shows the result, or output, of the calculation.

According to the passage, one function of the memory unit is _________.

A. to control the keyboard

B. to store temporary results during calculation

C. to send codes to the display unit

D. to alter basic arithmetic instructions

Read the following passage and mark the letter A, B, C or D on your answer sheet to indicate the correct answer to each of the following questions.

In the history of technology, computers and calculators were innovative developments. They are essentially different from all other machines because they have a memory. This memory stores instructions and information. In a calculator, the instructions are the various functions of arithmetic, which are permanently remembered by the machine and cannot be altered or added to. The information consists of the numbers which are keyed in.

An electronic pocket calculator can perform almost instant arithmetic. A calculator requires an input unit to feed in numbers, a processing unit to make the calculation, a memory unit, and an output unit to display the result. The calculator is powered by a small battery or by a panel of solar cells. Inside is a microchip that contains the memory and processing units and also controls the input unit, which is the keyboard, and the output unit, which is the display.

The input unit has keys for numbers and operations. Beneath the key is a printed circuit board containing a set of contacts for each key. Pressing a key closes the contacts and sends a signal along a pair of lines in the circuit board to the processing unit, in which the binary code for that key is stored in the memory. The processing unit also sends the code to the display. Each key is connected by a different pair of lines to the processing unit, which repeatedly checks the lines to find out when a pair is linked by a key.

The memory unit stores the arithmetic instructions for the processing unit and holds the temporary results that occur during calculation. Storage cells in the memory unit hold the binary codes for the keys that have been pressed. The number codes, together with the operation code for the plus key, are held in temporary cells until the processing unit requires them.

When the equals key is pressed, it sends a signal to the processing unit. This takes the operation code - for example, addition - and the two numbers being held in the memory unit and performs the operation on the two numbers. After the addition is done, the result goes to the decoder in the calculator's microchip. This code is then sent to the liquid crystal display unit, which shows the result, or output, of the calculation.

What is the main purpose of the passage?

A. To summarize the history of technology

B. To explain how a calculator works

C. To discuss innovative developments in technology

D. To compare computers and calculators with other machines

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions.

In the history of technology, computers and calculators were innovative developments. They are essentially different from all other machines because they have a memory. This memory stores instructions and information. In a calculator, the instructions are the various functions of arithmetic, which are permanently remembered by the machine and cannot be altered or added to. The information consists of the numbers keyed in.

An electronic pocket calculator can perform almost instant arithmetic. A calculator requires an input unit to feed in numbers, a processing unit to make the calculation, a memory unit, and an output unit to display the result. The calculator is powered by a small battery or by a panel of solar cells. Inside is a microchip that contains the memory and processing units and also controls the input unit, which is the keyboard, and the output unit, which is the display.

The input unit has keys for numbers and operations. Beneath the key is a printed circuit board containing a set of contacts for each key. Pressing a key closes the contacts and sends a signal along a pair of lines in the circuit board to the processing unit, in which the binary code for that key is stored in the memory. The processing unit also sends the code to the display. Each key is connected by a different pair of lines to the processing unit, which repeatedly checks the lines to find out when a pair is linked by a key.

The memory unit stores the arithmetic instructions for the processing unit and holds the temporary results that occur during calculation. Storage cells in the memory unit hold the binary codes for the keys that have been pressed. The number codes, together with the operation code for the plus key, are held in temporary cells until the processing unit requires them.
When the equals key is pressed, it sends a signal to the processing unit. This takes the operation code-for example, addition-and the two numbers being held in the memory unit and performs the operation on the two numbers. A full adder does the addition, and the result goes to the decoder in the calculator's microchip. This code is then sent to the liquid crystal display unit, which shows the result, or output, of the calculation.

What is the main purpose of the passage?

A. To discuss innovative developments in technology

B. To compare computers and calculators with other machines

C. To summarize the history of technology

D. To explain how a calculator works

Read the following passage and mark the letter A, B, C or D on your answer sheet to indicate the correct answer to each of the questions

      Most people can remember a phone number for up to thirty seconds. When this short amount of time elapses, however, the numbers are erased from the memory. How did the information get there in the first place? Information that makes its way to the short term memory (STM) does so via the sensory storage area. The brain has a filter which only allows stimuli that is of immediate interest to pass on to the STM, also known as the working memory.

      There is much debate about the capacity and duration of the short term memory. The most accepted theory comes from George A. Miller, a cognitive psychologist who suggested that humans can remember approximately seven chunks of information. A chunk is defined as a meaningful unit of information, such as a word or name rather than just a letter or number. Modern theorists suggest that one can increase the capacity of the short term memory by chunking, or classifying similar information together. By organizing information, one can optimize the STM, and improve the chances of a memory being passed on to long term storage.

          When making a conscious effort to memorize something, such as information for an exam, many people engage in "rote rehearsal". By repeating something over and over again, one is able to keep a memory alive. Unfortunately, this type of memory maintenance only succeeds if there are no interruptions. As soon as a person stops rehearsing the information, it has the tendency to disappear.

          When a pen and paper are not handy, people often attempt to remember a phone number by repeating it aloud. If the doorbell rings or the dog barks to come in before a person has the opportunity to make a phone call, he will likely forget the number instantly. Therefore, rote rehearsal is not an efficient way to pass information from the short term to long term memory. A better way is to practice "elaborate rehearsal". This involves assigning semantic meaning to a piece of information so that it can be filed along with other pre-existing long term memories.

      Encoding information semantically also makes it more retrievable. Retrieving information can be done by recognition or recall. Humans can easily recall memories that are stored in the long term memory and used often; however, if a memory seems to be forgotten, it may eventually be retrieved by prompting.

          The more cues a person is given (such as pictures), the more likely a memory can be retrieved. This is why multiple choice tests are often used for subjects that require a lot of memorization.

The word elapses in paragraph 1 is closest in meaning to:

A. continues

B. adds up

C. passes

D. appears

Read the following passage and mark the letter A, B, C or D on your answer sheet to indicate the correct answer to each of the following questions.

In the history of technology, computers and calculators were innovative developments. They are essentially different from all other machines because they have a memory. This memory stores instructions and information. In a calculator, the instructions are the various functions of arithmetic, which are permanently remembered by the machine and cannot be altered or added to. The information consists of the numbers which are keyed in.

An electronic pocket calculator can perform almost instant arithmetic. A calculator requires an input unit to feed in numbers, a processing unit to make the calculation, a memory unit, and an output unit to display the result. The calculator is powered by a small battery or by a panel of solar cells. Inside is a microchip that contains the memory and processing units and also controls the input unit, which is the keyboard, and the output unit, which is the display.

The input unit has keys for numbers and operations. Beneath the key is a printed circuit board containing a set of contacts for each key. Pressing a key closes the contacts and sends a signal along a pair of lines in the circuit board to the processing unit, in which the binary code for that key is stored in the memory. The processing unit also sends the code to the display. Each key is connected by a different pair of lines to the processing unit, which repeatedly checks the lines to find out when a pair is linked by a key.

The memory unit stores the arithmetic instructions for the processing unit and holds the temporary results that occur during calculation. Storage cells in the memory unit hold the binary codes for the keys that have been pressed. The number codes, together with the operation code for the plus key, are held in temporary cells until the processing unit requires them.

When the equals key is pressed, it sends a signal to the processing unit. This takes the operation code - for example, addition - and the two numbers being held in the memory unit and performs the operation on the two numbers. After the addition is done, the result goes to the decoder in the calculator's microchip. This code is then sent to the liquid crystal display unit, which shows the result, or output, of the calculation.

In what part of the calculator are the processing and memory units?

A. The output unit

B. The solar cells

C. The battery

D. The microchip

Read the following passage and mark the letter A, B, C or D on your answer sheet to indicate the correct answer to each of the questions

      Most people can remember a phone number for up to thirty seconds. When this short amount of time elapses, however, the numbers are erased from the memory. How did the information get there in the first place? Information that makes its way to the short term memory (STM) does so via the sensory storage area. The brain has a filter which only allows stimuli that is of immediate interest to pass on to the STM, also known as the working memory.

      There is much debate about the capacity and duration of the short term memory. The most accepted theory comes from George A. Miller, a cognitive psychologist who suggested that humans can remember approximately seven chunks of information. A chunk is defined as a meaningful unit of information, such as a word or name rather than just a letter or number. Modern theorists suggest that one can increase the capacity of the short term memory by chunking, or classifying similar information together. By organizing information, one can optimize the STM, and improve the chances of a memory being passed on to long term storage.

          When making a conscious effort to memorize something, such as information for an exam, many people engage in "rote rehearsal". By repeating something over and over again, one is able to keep a memory alive. Unfortunately, this type of memory maintenance only succeeds if there are no interruptions. As soon as a person stops rehearsing the information, it has the tendency to disappear.

          When a pen and paper are not handy, people often attempt to remember a phone number by repeating it aloud. If the doorbell rings or the dog barks to come in before a person has the opportunity to make a phone call, he will likely forget the number instantly. Therefore, rote rehearsal is not an efficient way to pass information from the short term to long term memory. A better way is to practice "elaborate rehearsal". This involves assigning semantic meaning to a piece of information so that it can be filed along with other pre-existing long term memories.

      Encoding information semantically also makes it more retrievable. Retrieving information can be done by recognition or recall. Humans can easily recall memories that are stored in the long term memory and used often; however, if a memory seems to be forgotten, it may eventually be retrieved by prompting.

          The more cues a person is given (such as pictures), the more likely a memory can be retrieved. This is why multiple choice tests are often used for subjects that require a lot of memorization.

How do theorists believe a person can remember more information in a short time?

A. By repeating it

B. By drawing it

C. By organizing it 

D. By giving it a name

Read the following passage and mark the letter A, B, C or D on your answer sheet to indicate the correct answer to each of the questions from 3 to 9.

        Most people can remember a phone number for up to thirty seconds. When this short amount of time elapses, however, the numbers are erased from the memory. How did the information get there in the first place? Information that makes its way to the short term memory (STM) does so via the sensory storage area. The brain has a filter which only allows stimuli that is of immediate interest to pass on to the STM, also known as the working memory.

        There is much debate about the capacity and duration of the short term memory. The most accepted theory comes from George A. Miller, a cognitive psychologist who suggested that humans can remember approximately seven chunks of information. A chunk is defined as a meaningful unit of information, such as a word or name rather than just a letter or number. Modern theorists suggest that one can increase the capacity of the short term memory by chunking, or classifying similar information together. By organizing information, one can optimize the STM, and improve the chances of a memory being passed on to long term storage.

        When making a conscious effort to memorize something, such as information for an exam, many people engage in "rote rehearsal". By repeating something over and over again, one is able to keep a memory alive. Unfortunately, this type of memory maintenance only succeeds if there are no interruptions. As soon as a person stops rehearsing the information, it has the tendency to disappear. When a pen and paper are not handy, people often attempt to remember a phone number by repeating it aloud. If the doorbell rings or the dog barks to come in before a person has the opportunity to make a phone call, he will likely forget the number instantly. Therefore, rote rehearsal is not an efficient way to pass information from the short term to long term memory. A better way is to practice "elaborate rehearsal". This involves assigning semantic meaning to a piece of information so that it can be filed along with other pre-existing long term memories.

        Encoding information semantically also makes it more retrievable. Retrieving information can be done by recognition or recall. Humans can easily recall memories that are stored in the long term memory and used often; however, if a memory seems to be forgotten, it may eventually be retrieved by prompting. The more cues a person is given (such as pictures), the more likely a memory can be retrieved. This is why multiple choice tests are often used for subjects that require a lot of memorization.

 

Which of the following is NOT supported by the passage?

A. A memory is kept alive through constant repetition

B. Multiple choice exams are the most difficult

C. The working memory is the same as the short term memory

D. Cues help people to recognize information