Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each...

Hãy tham gia nhóm Học sinh Hoc24OLM

Lê Quỳnh Anh

23 tháng 11 2019 lúc 8:29

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions from 35 to 42. Often the craft worker’s place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement, At Corinth and Athens, however, two of the best-known potters’ quarters were situated on the cities’ ou...

Đọc tiếp

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the

correct answer to each of the questions from 35 to 42.

Often the craft worker’s place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement, At Corinth and Athens, however, two of the best-known potters’ quarters were situated on the cities’ outskirts, and potters and makers of terra-cotta figurines were also established well within the city of Athens itself. The techniques of pottery manufacture had evolved well before the Greek period, but marked stylistic developments occurred in shape and in decoration, for example, in the interplay of black and other glazes with the red surface of the fired pot. Athenian black-figure and red-figure decoration, which emphasized human figures rather than animal images, was adopted between 630 and 530 B.C.; its distinctive color and luster were the result of the skillful adjustments of the kiln’s temperature during an extended three-stage period if firing the clayware. Whether it was the potters or the vase-painters who initiated changes in firing is unclear; the functions of making and decorating were usually divided between them, but neither group can have been so specialized that they did not share in the concerns of the other.

The broad utility of terra-cotta was such that workers in clay could generally afford to confine themselves to either decorated housewares like cooking pots and jars or building materials like roof tiles and drainpipes. Some sixth-and fifth-century B.C. Athenian pottery establishments are known to have concentrated on a limited range of fine ware, but a rural pottery establishment on the island of Tliasos produced many types of pottery and roof tiles too, presumably to meet local demand. Molds were used to create particular effects for some products, such as relief-decorated vessels and figurines; for other products such as roof tiles, which were needed in some quantity, they were used to facilitate mass production. There were also a number of poor-quality figurines and painted pots produced in quantity by easy, inexpensive means- as numerous featureless statuettes and unattractive cases testify.

According to the passage, all of the following are true of ancient Greek potters and vase painters EXCEPT __________________.

A. Their functions were so specialized that they lacked common concerns.

B. They sometimes produced inferior ware.

C. They produced pieces that had unusual color and shine.

D. They decorated many of their works with human images

Xem chi tiết

Lớp 0 Tiếng anh thí điểm

Lê Quỳnh Anh

30 tháng 9 2018 lúc 7:47

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions from 35 to 42. Often the craft worker’s place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement, At Corinth and Athens, however, two of the best-known potters’ quarters were situated on the cities’ ou...

Đọc tiếp

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the

correct answer to each of the questions from 35 to 42.

Often the craft worker’s place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement, At Corinth and Athens, however, two of the best-known potters’ quarters were situated on the cities’ outskirts, and potters and makers of terra-cotta figurines were also established well within the city of Athens itself. The techniques of pottery manufacture had evolved well before the Greek period, but marked stylistic developments occurred in shape and in decoration, for example, in the interplay of black and other glazes with the red surface of the fired pot. Athenian black-figure and red-figure decoration, which emphasized human figures rather than animal images, was adopted between 630 and 530 B.C.; its distinctive color and luster were the result of the skillful adjustments of the kiln’s temperature during an extended three-stage period if firing the clayware. Whether it was the potters or the vase-painters who initiated changes in firing is unclear; the functions of making and decorating were usually divided between them, but neither group can have been so specialized that they did not share in the concerns of the other.

The broad utility of terra-cotta was such that workers in clay could generally afford to confine themselves to either decorated housewares like cooking pots and jars or building materials like roof tiles and drainpipes. Some sixth-and fifth-century B.C. Athenian pottery establishments are known to have concentrated on a limited range of fine ware, but a rural pottery establishment on the island of Tliasos produced many types of pottery and roof tiles too, presumably to meet local demand. Molds were used to create particular effects for some products, such as relief-decorated vessels and figurines; for other products such as roof tiles, which were needed in some quantity, they were used to facilitate mass production. There were also a number of poor-quality figurines and painted pots produced in quantity by easy, inexpensive means- as numerous featureless statuettes and unattractive cases testify.

It can be inferred from the passage that most pottery establishments in ancient Greece were situated ___________ .

A. in city centers

B. on the outskirts of cities

C. where clay could be found

D. near other potters’ workshops

Xem chi tiết

Lớp 0 Tiếng anh thí điểm

Lê Quỳnh Anh

21 tháng 9 2017 lúc 15:27

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions from 35 to 42. Often the craft worker’s place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement, At Corinth and Athens, however, two of the best-known potters’ quarters were situated on the cities’ ou...

Đọc tiếp

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the

correct answer to each of the questions from 35 to 42.

Often the craft worker’s place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement, At Corinth and Athens, however, two of the best-known potters’ quarters were situated on the cities’ outskirts, and potters and makers of terra-cotta figurines were also established well within the city of Athens itself. The techniques of pottery manufacture had evolved well before the Greek period, but marked stylistic developments occurred in shape and in decoration, for example, in the interplay of black and other glazes with the red surface of the fired pot. Athenian black-figure and red-figure decoration, which emphasized human figures rather than animal images, was adopted between 630 and 530 B.C.; its distinctive color and luster were the result of the skillful adjustments of the kiln’s temperature during an extended three-stage period if firing the clayware. Whether it was the potters or the vase-painters who initiated changes in firing is unclear; the functions of making and decorating were usually divided between them, but neither group can have been so specialized that they did not share in the concerns of the other.

The broad utility of terra-cotta was such that workers in clay could generally afford to confine themselves to either decorated housewares like cooking pots and jars or building materials like roof tiles and drainpipes. Some sixth-and fifth-century B.C. Athenian pottery establishments are known to have concentrated on a limited range of fine ware, but a rural pottery establishment on the island of Tliasos produced many types of pottery and roof tiles too, presumably to meet local demand. Molds were used to create particular effects for some products, such as relief-decorated vessels and figurines; for other products such as roof tiles, which were needed in some quantity, they were used to facilitate mass production. There were also a number of poor-quality figurines and painted pots produced in quantity by easy, inexpensive means- as numerous featureless statuettes and unattractive cases testify.

It can be inferred from the passage that terra-cotta had which of the following advantages?

A. It did not break during the firing process.

B. It was less expensive than other available materials.

C. Its surface had a lasting shine.

D. It could be used for many purposes.

Xem chi tiết

Lớp 0 Tiếng anh thí điểm

Lê Quỳnh Anh

18 tháng 3 2018 lúc 17:06

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions from 35 to 42. Often the craft worker’s place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement, At Corinth and Athens, however, two of the best-known potters’ quarters were situated on the cities’ ou...

Đọc tiếp

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the

correct answer to each of the questions from 35 to 42.

Often the craft worker’s place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement, At Corinth and Athens, however, two of the best-known potters’ quarters were situated on the cities’ outskirts, and potters and makers of terra-cotta figurines were also established well within the city of Athens itself. The techniques of pottery manufacture had evolved well before the Greek period, but marked stylistic developments occurred in shape and in decoration, for example, in the interplay of black and other glazes with the red surface of the fired pot. Athenian black-figure and red-figure decoration, which emphasized human figures rather than animal images, was adopted between 630 and 530 B.C.; its distinctive color and luster were the result of the skillful adjustments of the kiln’s temperature during an extended three-stage period if firing the clayware. Whether it was the potters or the vase-painters who initiated changes in firing is unclear; the functions of making and decorating were usually divided between them, but neither group can have been so specialized that they did not share in the concerns of the other.

The broad utility of terra-cotta was such that workers in clay could generally afford to confine themselves to either decorated housewares like cooking pots and jars or building materials like roof tiles and drainpipes. Some sixth-and fifth-century B.C. Athenian pottery establishments are known to have concentrated on a limited range of fine ware, but a rural pottery establishment on the island of Tliasos produced many types of pottery and roof tiles too, presumably to meet local demand. Molds were used to create particular effects for some products, such as relief-decorated vessels and figurines; for other products such as roof tiles, which were needed in some quantity, they were used to facilitate mass production. There were also a number of poor-quality figurines and painted pots produced in quantity by easy, inexpensive means- as numerous featureless statuettes and unattractive cases testify.

The passage mainly discusses ancient Greek pottery and its __________ .

A. production techniques

B. similarity to other crafts

C. unusual materials

D. resemblance to earlier pottery

Xem chi tiết

Lớp 0 Tiếng anh thí điểm

Lê Quỳnh Anh

3 tháng 5 2017 lúc 7:36

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions from 35 to 42. Often the craft worker’s place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement, At Corinth and Athens, however, two of the best-known potters’ quarters were situated on the cities’ ou...

Đọc tiếp

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the

correct answer to each of the questions from 35 to 42.

Often the craft worker’s place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement, At Corinth and Athens, however, two of the best-known potters’ quarters were situated on the cities’ outskirts, and potters and makers of terra-cotta figurines were also established well within the city of Athens itself. The techniques of pottery manufacture had evolved well before the Greek period, but marked stylistic developments occurred in shape and in decoration, for example, in the interplay of black and other glazes with the red surface of the fired pot. Athenian black-figure and red-figure decoration, which emphasized human figures rather than animal images, was adopted between 630 and 530 B.C.; its distinctive color and luster were the result of the skillful adjustments of the kiln’s temperature during an extended three-stage period if firing the clayware. Whether it was the potters or the vase-painters who initiated changes in firing is unclear; the functions of making and decorating were usually divided between them, but neither group can have been so specialized that they did not share in the concerns of the other.

The broad utility of terra-cotta was such that workers in clay could generally afford to confine themselves to either decorated housewares like cooking pots and jars or building materials like roof tiles and drainpipes. Some sixth-and fifth-century B.C. Athenian pottery establishments are known to have concentrated on a limited range of fine ware, but a rural pottery establishment on the island of Tliasos produced many types of pottery and roof tiles too, presumably to meet local demand. Molds were used to create particular effects for some products, such as relief-decorated vessels and figurines; for other products such as roof tiles, which were needed in some quantity, they were used to facilitate mass production. There were also a number of poor-quality figurines and painted pots produced in quantity by easy, inexpensive means- as numerous featureless statuettes and unattractive cases testify.

The word “marked” in the first paragraph is closest in meaning to __________ .

A. original

B. attractive

C. noticeable

D. patterned

Xem chi tiết

Lớp 0 Tiếng anh thí điểm

Lê Quỳnh Anh

9 tháng 6 2017 lúc 11:29

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions from 35 to 42. Often the craft worker’s place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement, At Corinth and Athens, however, two of the best-known potters’ quarters were situated on the cities’ ou...

Đọc tiếp

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the

correct answer to each of the questions from 35 to 42.

Often the craft worker’s place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement, At Corinth and Athens, however, two of the best-known potters’ quarters were situated on the cities’ outskirts, and potters and makers of terra-cotta figurines were also established well within the city of Athens itself. The techniques of pottery manufacture had evolved well before the Greek period, but marked stylistic developments occurred in shape and in decoration, for example, in the interplay of black and other glazes with the red surface of the fired pot. Athenian black-figure and red-figure decoration, which emphasized human figures rather than animal images, was adopted between 630 and 530 B.C.; its distinctive color and luster were the result of the skillful adjustments of the kiln’s temperature during an extended three-stage period if firing the clayware. Whether it was the potters or the vase-painters who initiated changes in firing is unclear; the functions of making and decorating were usually divided between them, but neither group can have been so specialized that they did not share in the concerns of the other.

The broad utility of terra-cotta was such that workers in clay could generally afford to confine themselves to either decorated housewares like cooking pots and jars or building materials like roof tiles and drainpipes. Some sixth-and fifth-century B.C. Athenian pottery establishments are known to have concentrated on a limited range of fine ware, but a rural pottery establishment on the island of Tliasos produced many types of pottery and roof tiles too, presumably to meet local demand. Molds were used to create particular effects for some products, such as relief-decorated vessels and figurines; for other products such as roof tiles, which were needed in some quantity, they were used to facilitate mass production. There were also a number of poor-quality figurines and painted pots produced in quantity by easy, inexpensive means- as numerous featureless statuettes and unattractive cases testify.

The word “confine” in the second paragraph is closest in meaning to _________ .

A. adapt

B. train

C. restrict

D. or

Xem chi tiết

Lớp 0 Tiếng anh thí điểm

Lê Quỳnh Anh

28 tháng 3 2019 lúc 12:02

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions from 35 to 42. Often the craft worker’s place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement, At Corinth and Athens, however, two of the best-known potters’ quarters were situated on the cities’ ou...

Đọc tiếp

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the

correct answer to each of the questions from 35 to 42.

Often the craft worker’s place of employment in ancient Greece was set in rural isolation. Potter, for instance, found it convenient to locate their workshops near their source of clay, regardless of its relation to the center of settlement, At Corinth and Athens, however, two of the best-known potters’ quarters were situated on the cities’ outskirts, and potters and makers of terra-cotta figurines were also established well within the city of Athens itself. The techniques of pottery manufacture had evolved well before the Greek period, but marked stylistic developments occurred in shape and in decoration, for example, in the interplay of black and other glazes with the red surface of the fired pot. Athenian black-figure and red-figure decoration, which emphasized human figures rather than animal images, was adopted between 630 and 530 B.C.; its distinctive color and luster were the result of the skillful adjustments of the kiln’s temperature during an extended three-stage period if firing the clayware. Whether it was the potters or the vase-painters who initiated changes in firing is unclear; the functions of making and decorating were usually divided between them, but neither group can have been so specialized that they did not share in the concerns of the other.

The broad utility of terra-cotta was such that workers in clay could generally afford to confine themselves to either decorated housewares like cooking pots and jars or building materials like roof tiles and drainpipes. Some sixth-and fifth-century B.C. Athenian pottery establishments are known to have concentrated on a limited range of fine ware, but a rural pottery establishment on the island of Tliasos produced many types of pottery and roof tiles too, presumably to meet local demand. Molds were used to create particular effects for some products, such as relief-decorated vessels and figurines; for other products such as roof tiles, which were needed in some quantity, they were used to facilitate mass production. There were also a number of poor-quality figurines and painted pots produced in quantity by easy, inexpensive means- as numerous featureless statuettes and unattractive cases testify.

The word “presumably” in the second paragraph is closest in meaning to ____________

A. frequently

B. practically

C. preferably

D. probably

Xem chi tiết

Lớp 0 Tiếng anh thí điểm

Lê Quỳnh Anh

21 tháng 5 2017 lúc 15:41

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions from 35 to 42. In the North American colonies, red ware, a simple pottery fired at low temperatures, and stone ware, a strong, impervious grey pottery fired at high temperatures, were produced from two different native clays. These kinds of pottery were produced to supplement imported European pottery. When the American Revolution (1775-1783) interrupted...

Đọc tiếp

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions from 35 to 42.

In the North American colonies, red ware, a simple pottery fired at low temperatures, and stone ware, a strong, impervious grey pottery fired at high temperatures, were produced from two different native clays. These kinds of pottery were produced to supplement imported European pottery. When the American Revolution (1775-1783) interrupted the flow of the superior European ware, there was incentive for American potters to replace the imports with comparable domestic goods. Stoneware, which had been simple utilitarian kitchenware, grew increasingly ornate throughout the nineteenth century, and in addition to the earlier scratched and drawn designs, three dimensional molded relief decoration became popular. Representational motifs largely replaced the earlier abstract decorations. Birds and flowers were particularly evident, but other subjects lions, flags, and clipper ships are found. Some figurines, mainly of dogs and lions, were made in this medium. Sometimes a name, usually that of the potter, was die-stamped onto a piece.

As more and more large kilns were built to create the high-fired stoneware, experiments revealed that the same clay used to produce low-fired red ware could produce a stronger, paler pottery if fired at a hotter temperature. The result was yellow ware, used largely for serviceable items; but a further development was Rockingham ware one of the most important American ceramics of the nineteenth century. (The name of the ware was probably derived from its resemblance to English brown-glazed earthenware made in South Yorkshire.) It was created by adding a brown glaze to the fired clay, usually giving the finished product a mottled appearance. Various methods of spattering or sponging the glaze onto the ware account for the extremely wide variations in color and add to the interest of collecting Rockingham. An advanced form of Rockingham was flint enamel, created by dusting metallic powders onto the Rockingham glaze to produce brilliant varicolored streaks.

Articles for nearly every household activity and ornament could be bought in Rockingham ware: dishes and bowls, of course; also bedpans, foot warmers, cuspidors, lamp bases, doorknobs, molds, picture frames, even curtain tiebacks. All these items are highly collectible today and are eagerly sought. A few Rockingham specialties command particular affection among collectors and correspondingly high prices.

How did yellow ware achieve its distinctive color?

A. By sponging on a glaze

B. By dusting on metallic powders

C. By brown-glazing

D. By firing at a high temperature

Xem chi tiết

Lớp 0 Tiếng anh thí điểm

Lê Quỳnh Anh

28 tháng 1 2017 lúc 11:21

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions from 35 to 42. In the North American colonies, red ware, a simple pottery fired at low temperatures, and stone ware, a strong, impervious grey pottery fired at high temperatures, were produced from two different native clays. These kinds of pottery were produced to supplement imported European pottery. When the American Revolution (1775-1783) interrupt...

Đọc tiếp

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions from 35 to 42.

In the North American colonies, red ware, a simple pottery fired at low temperatures, and stone ware, a strong, impervious grey pottery fired at high temperatures, were produced from two different native clays. These kinds of pottery were produced to supplement imported European pottery. When the American Revolution (1775-1783) interrupted the flow of the superior European ware, there was incentive for American potters to replace the imports with comparable domestic goods. Stoneware, which had been simple utilitarian kitchenware, grew increasingly ornate throughout the nineteenth century, and in addition to the earlier scratched and drawn designs, threedimensional molded relief decoration became popular. Representational motifs largely replaced the earlier abstract decorations. Birds and flowers were particularly evident, but other subjects---lions, flags, and clipper ships---are found. Some figurines, mainly of dogs and lions, were made in this medium. Sometimes a name, usually that of the potter, was die-stamped onto a piece.

As more and more large kilns were built to create the high-fired stoneware, experiments revealed that the same clay used to produce low-fired red ware could produce a stronger, paler pottery if fired at a hotter temperature. The result was yellow ware, used largely for serviceable items; but a further development was Rockingham ware---one of the most important American ceramics of the nineteenth century. (The name of the ware was probably derived from its resemblance to English brown-glazed earthenware made in South Yorkshire.) It was created by adding a brown glaze to the fired clay, usually giving the finished product a mottled appearance. Various methods of spattering or sponging the glaze onto the ware account for the extremely wide variations in color and add to the interest of collecting Rockingham. An advanced form of Rockingham was flint enamel, created by dusting metallic powders onto the Rockingham glaze to produce brilliant varicolored streaks.

Articles for nearly every household activity and ornament could be bought in Rockingham ware: dishes and bowls, of course; also bedpans, foot warmers, cuspidors, lamp bases, doorknobs, molds, picture frames, even curtain tiebacks. All these items are highly collectible today and are eagerly sought. A few Rockingham specialties command particular affection among collectors and correspondingly high prices.

How did yellow ware achieve its distinctive color?

A. By sponging on a glaze

B. By dusting on metallic powders

C. By brown-glazing

D. By firing at a high temperature

Xem chi tiết

Lớp 0 Tiếng anh thí điểm

Khoá học trên OLM (olm.vn)

Khoá học trên OLM (olm.vn)

Câu hỏi

Khoá học trên OLM (olm.vn)

Khoá học trên OLM (olm.vn)