Đốt cháy hết hỗn hợp gồm Al và Fe có khồi lượng là 11,1 (g) trong đó khối lượng Fe nhiều hơn khối lượng Al là 5,7 g
phản ứng xong thu được sản phẩm là Al2O3 và Fe3O4
a) Tính khối lượng Oxi cần dùng
b) Tính khối lượng mỗi chất sản phẩm tạo thành
\(a)\\ 4Al+ 3O_2 \xrightarrow{t^o} 2Al_2O_3\\ 3Fe + 2O_2 \xrightarrow{t^o} Fe_3O_4\\ \)
b) Bảo toàn khối lượng :
\(m_{O_2} = 21,8 -13,8 =8(gam)\\ n_{O_2} = \dfrac{8}{32} = 0,25(mol)\\ V_{O_2} = 0,25.22,4 = 5,6(lít)\)
c)
\(n_{Al} = a(mol) ; n_{Fe} = b(mol)\Rightarrow 27a + 56b = 13,8(1)\\ n_{O_2} = 0,75a + \dfrac{2}{3}b = 0,25(2)\\ (1)(2)\Rightarrow a = 0,2 ; b = 0,15\\ \%m_{Al} = \dfrac{0,2.27}{13,8}.100\% =39,13\%\\ \%m_{Fe} = 100\% -39,13\% = 60,87\%\)
đốt cháy 1 hỗn hợp bột gồm Na và Al trong đó Na có khối lượng là 4,6g cần dùng 6,16 lít khí O2. Tính khối lượng Al2O3 thu được
$4Na+O_2\xrightarrow{t^o}2Na_2O(1)$
$4Al+3O_2\xrightarrow{t^o}2Al_2O_3(2)$
$n_{Na}=\dfrac{4,6}{23}=0,2(mol);n_{O_2}=\dfrac{6,16}{22,4}=0,275(mol)$
$\Rightarrow n_{O_2(1)}=0,25.n_{Na}=0,05(mol)$
$\Rightarrow n_{O_2(2)}=0,275-0,05=0,225(mol)$
$\Rightarrow n_{Al_2O_3}=\dfrac{2}{3}n_{O_2(2)}=0,15(mol)$
$\Rightarrow m_{Al_2O_3}=0,15.102=15,3(g)$
Đốt cháy hoàn toàn 27,6g một hỗn hợp gồm Al và Fe trong oxi, thu được một hỗn hợp chất rắn có khối lượng 43,6g. tính khối lượng Al và Fe ban đầu
\(n_{Al} = a ; n_{Fe} = b\Rightarrow 27a + 56b = 27,6(1)\\ 4Al + 3O_2 \xrightarrow{t^o} 2Al_2O_3\\ 3Fe + 2O_2 \xrightarrow{t^o} Fe_3O_4\\ n_{Al_2O_3} = \dfrac{1}{2}n_{Al} = 0,5a(mol)\\ n_{Fe_3O_4} = \dfrac{1}{3}n_{Fe} = \dfrac{b}{3}(mol)\\ \Rightarrow 0,5a.102 + \dfrac{b}{3}232 = 43,6(2)\\ (1)(2) \Rightarrow a = 0,4 ; b = 0,3\\ m_{Al} = 0,4.27 = 10,8(gam) ; m_{Fe} = 0,3.56 = 16,8(gam)\)
Đốt cháy hoàn toàn 27,6g một hỗn hợp gồm Al và Fe trong oxi, thu được một hỗn hợp chất rắn có khối lượng 43,6g. tính khối lượng Al và Fe ban đầu
* Ví dụ 1: Đốt cháy hoàn toàn 7,8 g hỗn hợp 2 kim loại Al và Mg cần dùng 4,48 lít O2 (đktc),sau phản ứng kết thúc thu được hỗn hợp chất rắn gồm Al2O3 và MgO.
a. Tính khối lượng của mỗi kim loại trong hỗn hợp ban đầu.
b. Tính khối lượng của Al2O3 và MgO thu được sau phản ứng.
Ví dụ 2: Để đốt cháy hết 6,72 lít hỗn hợp khí CH4 và C2H6 cần dùng 24 gam O2 , sau phản ứng thu được CO2 và H2O.
a. Tính khối lượng của mỗi khí trong hỗn hợp ban đầu.
b. Tính thể tích khí CO2 thu được sau phản ứng. Biết các thể tích khí đều đo ở đktc.
giúp tui!
a, Giả sử: \(\left\{{}\begin{matrix}n_{Al}=x\left(mol\right)\\n_{Fe}=y\left(mol\right)\end{matrix}\right.\)
⇒ 27x + 56y = 13,8 (1)
BTNT Al và Fe, có: \(\left\{{}\begin{matrix}n_{Al_2O_3}=\dfrac{1}{2}n_{Al}=\dfrac{1}{2}x\left(mol\right)\\n_{Fe_3O_4}=\dfrac{1}{3}n_{Fe}=\dfrac{1}{3}y\left(mol\right)\end{matrix}\right.\)
\(\Rightarrow\dfrac{1}{2}x.102+\dfrac{1}{3}y.232=21,8\left(g\right)\left(2\right)\)
Từ (1) và (2) \(\Rightarrow\left\{{}\begin{matrix}x=0,2\left(mol\right)\\y=0,15\left(mol\right)\end{matrix}\right.\)
\(\Rightarrow\left\{{}\begin{matrix}\%m_{Al}=\dfrac{0,2.27}{13,8}.100\%\approx39,1\%\\\%m_{Fe}\approx60,9\%\end{matrix}\right.\)
b, BTNT O, có: \(n_{O_2}=\dfrac{3n_{Al_2O_3}+4n_{Fe_3O_4}}{2}=0,6\left(mol\right)\)
\(\Rightarrow V_{O_2}=0,6.22,4=13,44\left(l\right)\)
Bạn tham khảo nhé!
Hỗn hợp M gồm Al, Al2O3, Fe3O4, CuO, Fe và Cu, trong đó oxi chiếm 20,4255% khối lượng hỗn hợp. Cho 6,72 lít khí CO (đktc) đi qua 35,25 gam M nung nóng, sau một thời gian thu được hỗn hợp rắn G và hỗn hợp khí X có tỉ khối so với H2 bằng 18. Hòa tan hết toàn bộ G trong lượng dư dung dịch HNO3 loãng. Sau khi các phản ứng xảy ra hoàn toàn, thu được dung dịch chứa m gam muối (không có muối NH4NO3 sinh ra) và 4,48 lít (đktc) hỗn hợp khí Z gồm NO và N2O. Tỉ khối của Z so với H2 là 16,75. Giá trị của m là
A. 96,25
B. 117,95
C. 139,50
D. 80,75
Đốt cháy hoàn toàn 27,8 g hỗn hợp gồm Al và Fe (trong đó Al chiếm 19,2%). Hãy tính:
- Thể tích không khí cần dùng (biết oxi chiếm 20% thể tích không khí)
- Khối lượng hỗn hợp chất rắn tạo thành.
\(m_{Al}=27,8.19,2\%=5,4\left(g\right)\\ m_{Fe}=27,8-5,4=22,4\left(g\right)\\ \rightarrow\left\{{}\begin{matrix}n_{Al}=\dfrac{5,4}{27}=0,2\left(mol\right)\\n_{Fe}=\dfrac{22,4}{56}=0,4\left(mol\right)\end{matrix}\right.\)
PTHH:
4Al + 3O2 --to--> 2Al2O3
0,2-->0,15------->0,1
3Fe + 2O2 --to--> Fe3O4
0,4-->4/15--------->2/15
\(\rightarrow\left\{{}\begin{matrix}V_{kk}=\left(0,15+\dfrac{4}{15}\right).22,4.5=\dfrac{140}{3}\left(l\right)\\m_{Cran}=0,1.102+\dfrac{2}{15}.232=\dfrac{617}{15}\left(g\right)\end{matrix}\right.\)
mAl=27,8.19,42%=5,4g
⇒nAl=\(\dfrac{5,4}{27}\)=0,2mol
⇒nFe=\(\dfrac{27,8-5,4}{56}\)=0,4mol
4Al+3O2to→2Al2O34
3Fe+2O2to→Fe3O4
⇒nO2=\(\dfrac{3}{4}\)nAl+\(\dfrac{2}{3}\)nFe=\(\dfrac{5}{12}\)mol
⇒Vkk=\(\dfrac{5}{12}\).22,4.5=46,67l
b,
mrắn=27,8+mO2=27,8+\(\dfrac{5}{12}\)32=41,1g
Câu 1: Đốt cháy 22,9(g) hỗn hợp gốm Fe,Al,Mg sau phản ứng thấy có 37.3 (g) oxit. Biết trong hỗn hợp ban đầu khối lượng của Fe lớn hơn Mg 7,6(g). Tính khối lượng từng kim loại trong hỗn hợp.
Câu 3: Đốt cháy hoàn toàn 15,6 gam hỗn hợp hai kim loại Mg và Al trong bình đựng khí Oxi, sau phản ứng xảy ra hoàn toàn thu được 28,4 gam hỗn hợp 2 oxit. Thể tích khí oxi (ở đktc) đã dùng để đốt cháy lượng kim loại trên
Câu 4 : Muốn điều chế được 3,36 lít khí oxi (đktc) thì khối lượng KMnO4 cần nhiệt phân là bao nhiêu, viết phương trình điều chế.
Câu 5: Oxit của 1 kim loại hóa trị II có tỉ lệ khối lượng của kim loại là 60%. Tìm CT kim loại
Câu 6:Ghi 2 PTHH điều chế khí oxi trong phòng thí nghiệm(đã dạy/trong SGK có)