Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions

       Archimedes’s Principle is a law of physics that states that when an object is totally or partially immersed in a fluid, it experiences an upthrust equal to the weight of the fluid displaced. The principle is most frequently applied to the behaviour of objects in water, and helps to explain floating and sinking, and why objects seem lighter in water. It also applies to balloons.

        The key word in the principle is “upthrust”, which refers to the force acting upward to reduce the apparent weight of the object when it is under water. If, for example, a metal block with a volume of 100 cm³  is dipped in water, it displaces an equal volume of water, which has a weight of approximately 1 N (3.5 oz). The block therefore seems to weigh about 1 N less.

        An object will float if its average density is less than that of water. If it is totally submerged, the weight of the water it displaces (and hence the upthrust on it) is greater than its own weight, and it is forced upward and out of water, until the weight if water displaced by submerged part is exactly equal to the weight of the floating object. Thus a block of wood with a density six tenths that of water will float with six tenths of its volume under water, since at that point the weight of fluid displaced is the same as the blocks’s own weight. If a dense material is made into a suitable shape, it will float because of Archimedes’s principle. A ship floats, whereas a block of iron of the same mass sinks.

        It is also because of Archimedes’s principle that ships float lower in the water when they are heavily loaded (more water must be displaced to give the necessary upthrust). In addition, they cannot be so heavily loaded if they are to sail in fresh water as they can if they are to sail in the sea, since fresh water is less dense than sea water, and so more water must be displaced to give the necessary upthrust. This means the ship is lower in the water, which can be dangerous in rough weather.

         From “Archimedes’s Principle”, MicrosoftÒ Student 2008[DVD]. Microsoft Corporation, 2007.

Archimedes’ Principle explains why ____

A. all objects will float

B. Archimedes became 

C. objects seem lighter in water

D. humans can swim

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions

       Archimedes’s Principle is a law of physics that states that when an object is totally or partially immersed in a fluid, it experiences an upthrust equal to the weight of the fluid displaced. The principle is most frequently applied to the behaviour of objects in water, and helps to explain floating and sinking, and why objects seem lighter in water. It also applies to balloons.

        The key word in the principle is “upthrust”, which refers to the force acting upward to reduce the apparent weight of the object when it is under water. If, for example, a metal block with a volume of 100 cm³  is dipped in water, it displaces an equal volume of water, which has a weight of approximately 1 N (3.5 oz). The block therefore seems to weigh about 1 N less.

        An object will float if its average density is less than that of water. If it is totally submerged, the weight of the water it displaces (and hence the upthrust on it) is greater than its own weight, and it is forced upward and out of water, until the weight if water displaced by submerged part is exactly equal to the weight of the floating object. Thus a block of wood with a density six tenths that of water will float with six tenths of its volume under water, since at that point the weight of fluid displaced is the same as the blocks’s own weight. If a dense material is made into a suitable shape, it will float because of Archimedes’s principle. A ship floats, whereas a block of iron of the same mass sinks.

        It is also because of Archimedes’s principle that ships float lower in the water when they are heavily loaded (more water must be displaced to give the necessary upthrust). In addition, they cannot be so heavily loaded if they are to sail in fresh water as they can if they are to sail in the sea, since fresh water is less dense than sea water, and so more water must be displaced to give the necessary upthrust. This means the ship is lower in the water, which can be dangerous in rough weather.

         From “Archimedes’s Principle”, MicrosoftÒ Student 2008[DVD]. Microsoft Corporation, 2007.

What happens when something is immersed in a fluid?

A. It will be pushed further down with a force, equal to the weight of the fluid displaced.

B. It receives an upward force, equal to the weight of the fluid displaced

C. It receives a download force, equal to the weight of the fluid displaced

D. The fluid will expand the object and overflow to the floor

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions

       Archimedes’s Principle is a law of physics that states that when an object is totally or partially immersed in a fluid, it experiences an upthrust equal to the weight of the fluid displaced. The principle is most frequently applied to the behaviour of objects in water, and helps to explain floating and sinking, and why objects seem lighter in water. It also applies to balloons.

        The key word in the principle is “upthrust”, which refers to the force acting upward to reduce the apparent weight of the object when it is under water. If, for example, a metal block with a volume of 100 cm³  is dipped in water, it displaces an equal volume of water, which has a weight of approximately 1 N (3.5 oz). The block therefore seems to weigh about 1 N less.

        An object will float if its average density is less than that of water. If it is totally submerged, the weight of the water it displaces (and hence the upthrust on it) is greater than its own weight, and it is forced upward and out of water, until the weight if water displaced by submerged part is exactly equal to the weight of the floating object. Thus a block of wood with a density six tenths that of water will float with six tenths of its volume under water, since at that point the weight of fluid displaced is the same as the blocks’s own weight. If a dense material is made into a suitable shape, it will float because of Archimedes’s principle. A ship floats, whereas a block of iron of the same mass sinks.

        It is also because of Archimedes’s principle that ships float lower in the water when they are heavily loaded (more water must be displaced to give the necessary upthrust). In addition, they cannot be so heavily loaded if they are to sail in fresh water as they can if they are to sail in the sea, since fresh water is less dense than sea water, and so more water must be displaced to give the necessary upthrust. This means the ship is lower in the water, which can be dangerous in rough weather.

         From “Archimedes’s Principle”, MicrosoftÒ Student 2008[DVD]. Microsoft Corporation, 2007.

Ships cannot be so heavily loaded if they want to sail in fresh water as they sail in the sea, because ____

A. fresh water is ‘lighter’ than sea water

B. there’s too much salt in sea water 

C. sea water is ‘saltier’ than fresh water

D. fresh water is more polluted

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions

       Archimedes’s Principle is a law of physics that states that when an object is totally or partially immersed in a fluid, it experiences an upthrust equal to the weight of the fluid displaced. The principle is most frequently applied to the behaviour of objects in water, and helps to explain floating and sinking, and why objects seem lighter in water. It also applies to balloons.

        The key word in the principle is “upthrust”, which refers to the force acting upward to reduce the apparent weight of the object when it is under water. If, for example, a metal block with a volume of 100 cm³  is dipped in water, it displaces an equal volume of water, which has a weight of approximately 1 N (3.5 oz). The block therefore seems to weigh about 1 N less.

        An object will float if its average density is less than that of water. If it is totally submerged, the weight of the water it displaces (and hence the upthrust on it) is greater than its own weight, and it is forced upward and out of water, until the weight if water displaced by submerged part is exactly equal to the weight of the floating object. Thus a block of wood with a density six tenths that of water will float with six tenths of its volume under water, since at that point the weight of fluid displaced is the same as the blocks’s own weight. If a dense material is made into a suitable shape, it will float because of Archimedes’s principle. A ship floats, whereas a block of iron of the same mass sinks.

        It is also because of Archimedes’s principle that ships float lower in the water when they are heavily loaded (more water must be displaced to give the necessary upthrust). In addition, they cannot be so heavily loaded if they are to sail in fresh water as they can if they are to sail in the sea, since fresh water is less dense than sea water, and so more water must be displaced to give the necessary upthrust. This means the ship is lower in the water, which can be dangerous in rough weather.

         From “Archimedes’s Principle”, MicrosoftÒ Student 2008[DVD]. Microsoft Corporation, 2007.

The word “upthrust” in the passage refers to the _____

A. upward push

B. upper side of an object

C. upturned force

D. upside-down turn

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions

       Archimedes’s Principle is a law of physics that states that when an object is totally or partially immersed in a fluid, it experiences an upthrust equal to the weight of the fluid displaced. The principle is most frequently applied to the behaviour of objects in water, and helps to explain floating and sinking, and why objects seem lighter in water. It also applies to balloons.

        The key word in the principle is “upthrust”, which refers to the force acting upward to reduce the apparent weight of the object when it is under water. If, for example, a metal block with a volume of 100 cm³  is dipped in water, it displaces an equal volume of water, which has a weight of approximately 1 N (3.5 oz). The block therefore seems to weigh about 1 N less.

        An object will float if its average density is less than that of water. If it is totally submerged, the weight of the water it displaces (and hence the upthrust on it) is greater than its own weight, and it is forced upward and out of water, until the weight if water displaced by submerged part is exactly equal to the weight of the floating object. Thus a block of wood with a density six tenths that of water will float with six tenths of its volume under water, since at that point the weight of fluid displaced is the same as the blocks’s own weight. If a dense material is made into a suitable shape, it will float because of Archimedes’s principle. A ship floats, whereas a block of iron of the same mass sinks.

        It is also because of Archimedes’s principle that ships float lower in the water when they are heavily loaded (more water must be displaced to give the necessary upthrust). In addition, they cannot be so heavily loaded if they are to sail in fresh water as they can if they are to sail in the sea, since fresh water is less dense than sea water, and so more water must be displaced to give the necessary upthrust. This means the ship is lower in the water, which can be dangerous in rough weather.

         From “Archimedes’s Principle”, MicrosoftÒ Student 2008[DVD]. Microsoft Corporation, 2007.

The word “volume” in the passage refers to ______.

A. loudness

B. quantity

C. frequency

D.  lenght

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions

       Archimedes’s Principle is a law of physics that states that when an object is totally or partially immersed in a fluid, it experiences an upthrust equal to the weight of the fluid displaced. The principle is most frequently applied to the behaviour of objects in water, and helps to explain floating and sinking, and why objects seem lighter in water. It also applies to balloons.

        The key word in the principle is “upthrust”, which refers to the force acting upward to reduce the apparent weight of the object when it is under water. If, for example, a metal block with a volume of 100 cm³  is dipped in water, it displaces an equal volume of water, which has a weight of approximately 1 N (3.5 oz). The block therefore seems to weigh about 1 N less.

        An object will float if its average density is less than that of water. If it is totally submerged, the weight of the water it displaces (and hence the upthrust on it) is greater than its own weight, and it is forced upward and out of water, until the weight if water displaced by submerged part is exactly equal to the weight of the floating object. Thus a block of wood with a density six tenths that of water will float with six tenths of its volume under water, since at that point the weight of fluid displaced is the same as the blocks’s own weight. If a dense material is made into a suitable shape, it will float because of Archimedes’s principle. A ship floats, whereas a block of iron of the same mass sinks.

        It is also because of Archimedes’s principle that ships float lower in the water when they are heavily loaded (more water must be displaced to give the necessary upthrust). In addition, they cannot be so heavily loaded if they are to sail in fresh water as they can if they are to sail in the sea, since fresh water is less dense than sea water, and so more water must be displaced to give the necessary upthrust. This means the ship is lower in the water, which can be dangerous in rough weather.

         From “Archimedes’s Principle”, MicrosoftÒ Student 2008[DVD]. Microsoft Corporation, 2007.

A block of wood with a density seven tenths that of water will ____

A. go up and down the sink

B. float with a half of its volume under water

C. float with an equal volume of its volume under water

D. sink immediately when submerged

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions

       Archimedes’s Principle is a law of physics that states that when an object is totally or partially immersed in a fluid, it experiences an upthrust equal to the weight of the fluid displaced. The principle is most frequently applied to the behaviour of objects in water, and helps to explain floating and sinking, and why objects seem lighter in water. It also applies to balloons.

        The key word in the principle is “upthrust”, which refers to the force acting upward to reduce the apparent weight of the object when it is under water. If, for example, a metal block with a volume of 100 cm³  is dipped in water, it displaces an equal volume of water, which has a weight of approximately 1 N (3.5 oz). The block therefore seems to weigh about 1 N less.

        An object will float if its average density is less than that of water. If it is totally submerged, the weight of the water it displaces (and hence the upthrust on it) is greater than its own weight, and it is forced upward and out of water, until the weight if water displaced by submerged part is exactly equal to the weight of the floating object. Thus a block of wood with a density six tenths that of water will float with six tenths of its volume under water, since at that point the weight of fluid displaced is the same as the blocks’s own weight. If a dense material is made into a suitable shape, it will float because of Archimedes’s principle. A ship floats, whereas a block of iron of the same mass sinks.

        It is also because of Archimedes’s principle that ships float lower in the water when they are heavily loaded (more water must be displaced to give the necessary upthrust). In addition, they cannot be so heavily loaded if they are to sail in fresh water as they can if they are to sail in the sea, since fresh water is less dense than sea water, and so more water must be displaced to give the necessary upthrust. This means the ship is lower in the water, which can be dangerous in rough weather.

         From “Archimedes’s Principle”, MicrosoftÒ Student 2008[DVD]. Microsoft Corporation, 2007.

A ship floats, whereas a block of iron of the same mass sinks because the ship ____

A. is made of wood

B. is lighter

C. has buoys 

D. has a special shape

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions

       Archimedes’s Principle is a law of physics that states that when an object is totally or partially immersed in a fluid, it experiences an upthrust equal to the weight of the fluid displaced. The principle is most frequently applied to the behaviour of objects in water, and helps to explain floating and sinking, and why objects seem lighter in water. It also applies to balloons.

        The key word in the principle is “upthrust”, which refers to the force acting upward to reduce the apparent weight of the object when it is under water. If, for example, a metal block with a volume of 100 cm³  is dipped in water, it displaces an equal volume of water, which has a weight of approximately 1 N (3.5 oz). The block therefore seems to weigh about 1 N less.

        An object will float if its average density is less than that of water. If it is totally submerged, the weight of the water it displaces (and hence the upthrust on it) is greater than its own weight, and it is forced upward and out of water, until the weight if water displaced by submerged part is exactly equal to the weight of the floating object. Thus a block of wood with a density six tenths that of water will float with six tenths of its volume under water, since at that point the weight of fluid displaced is the same as the blocks’s own weight. If a dense material is made into a suitable shape, it will float because of Archimedes’s principle. A ship floats, whereas a block of iron of the same mass sinks.

        It is also because of Archimedes’s principle that ships float lower in the water when they are heavily loaded (more water must be displaced to give the necessary upthrust). In addition, they cannot be so heavily loaded if they are to sail in fresh water as they can if they are to sail in the sea, since fresh water is less dense than sea water, and so more water must be displaced to give the necessary upthrust. This means the ship is lower in the water, which can be dangerous in rough weather.

         From “Archimedes’s Principle”, MicrosoftÒ Student 2008[DVD]. Microsoft Corporation, 2007.

The word “displaces” in the passage almost means “_____”

A. takes the place of        

B. takes place

C. replaces with a new one

D. puts in position

Read the following passage and mark the letter A, B, C, or D on your answer sheet to indicate the correct answer to each of the questions

If the salinity of ocean waters is analyzed, it is found to vary only slightly from place to place. Nevertheless, some of these small changes are important. There are three basic processes that cause a change in oceanic salinity. One of these is the subtraction of water from the ocean by means of evaporation-conversion of liquid water to water vapor. In this manner, the salinity is increased, since the salt behind. If this is carried to the extreme, of course, white crystals of salt would be left behind.

The opposite of evaporation is precipitation, such as rain, by which water is added to the ocean. Here the ocean is being diluted so that the salinity is decreased. This may occur in areas of high rainfall or in coastal regions where rivers flow into the ocean. Thus salinity may be increased by the subtraction of water by evaporation, or decreased by the addition of fresh water by precipitation or runoff.

Normally, in tropical regions where the sun is very strong, the ocean salinity is somewhat higher than it is in other parts of the world where there is not as much evaporation. Similarly, in coastal regions where rivers dilute the sea, salinity is somewhat lower than in other oceanic areas.

A third process by which salinity may be altered is associated with the formation and melting of sea ice. When seawater is frozen, the dissolved materials are left behind. In this manner, seawater directly beneath freshly formed sea ice has a higher salinity than it did before the ice appeared. Of course, when this ice melts, it will tend to decrease the salinity of the surrounding water.

In the Weddell Sea, off Antarctica, the densest water in the ocean is formed as a result of this freezing process, which increases the salinity of cold water. This heavy water sinks and is found in the deeper portions of the oceans of the world.

Why does the author mention the Weddell Sea?

A. To show that this body of water has salinity variations 

B. To compare Antarctic waters with Arctic waters 

C. To point out the location of deep waters 

D. To give an example of cold-water salinity